安装桶形铰链

持续时间: 3:02

Watch this video and you’ll learn 怎么样 to install invisible barrel hinges. Invisible? Yes, when a door fitted with barrel hinges is closed, you can’t see the hinges from the front or the side. Consider installing these disappearing barrel hinges on your next project.

什么是桶铰链?

当您不想要桶形铰链时,它是一个绝佳的选择 木工五金 显示在成品的外部。为了使线条简洁明了,桶形铰链非常完美。桶形铰链的缺点在于,它们比标准铰链安装起来更棘手。

安装桶铰链

当你学会了 怎么样 to build cabinets, you also learned 怎么样 to install standard hinges. It’s time to learn something new!

使用桶形铰链时,要记住几件事。首先,它们有多种尺寸,尺寸是公制的。您绝对必须为枪管铰链钻一个完全匹配的公制尺寸孔。而且,这些孔必须正确定位,否则铰链将无法正常工作。必须精心布置,因为钻孔后没有调整空间。在进行钻孔之前,请花一些时间进行标记和测量,以确保所有零件都正确对齐。

内幕观点

Watch as we show you close-up 怎么样 the unique barrel hinge mechanism, that includes a slotted screw inside the barrel, locks the hinge into the predrilled hole — it’s ingenious!

Discussion
  • (将不会发布)

11 回应“安装桶形铰链”
  1. Peter Axton
    彼得·阿克斯顿

    那不是’t mentioned in this video nor have I seen reference to it on the Web but there is also a partial countersink and grooving on the edge of the hinge. That was visible on your hinge. Not being able to confirm it, it is only my opinion on 怎么样 they should be installed but, when I installed a pair of barrel hinges, I drilled a countersink into the timber beside the one on the hinge, completing the recess. A small hole into the recess, then inserted a small screw. This added to the security of the hinge installation.

    回复
  2. Mick Sandine
    米克·桑丁(Mick Sandine)

    好吧,最难的部分是布局。下一个视频怎么样?

    回复
    • Peter
      彼得

      嗨,米克,我刚刚注意到您对“how”. When I fitted the hinges, firstly I worked out the distance between the centres of the barrels when the hinge was fully open and that told me 怎么样 far from the edge the holes had to be if the lid was to open fully. Having decided that, I felt that the most critical point regarding the set up was ensure I had the holes in line. It was a jewel box so only a shallow lid so I formed the sides and decided on the hinge location. I then drilled a smaller pilot hole from the top, through the location point and deep enough to enter the part that would form the base. When I cut the lid section of the box, there were holes on either side exactly in line. You could do the same thing by clamping the 2 halves together. You then enlarge the holes to the diameter and depth you need.

      回复
  3. leninsebastopol
    列宁塞巴斯托波尔

    乔治,您告诉我们了什么,谢谢,但是操作方法很重要,尤其是在有关放置重要性的预防性警告中。毕竟,标题是“安装桶形铰链”。

    回复
  4. Mark G
    马克·G

    好吧,现在我知道它们是什么了,但是视频未解决如何安装它们,只是要注意什么???主权等???

    回复
  5. Jay
    周杰伦

    您如何对齐并在铰链上钻孔?超过9.5毫米的物体都不适合3/8″手动钻夹头,所以我假设您使用钻床加工那些孔。此外,还有12毫米的钻头(略小于1/2″)比铰链昂贵,您将需要购买增量为1/2毫米的套件。不建议将其用于木材侧面厚度小于3/4的情况″当在Rockler网站上阅读有关它们的评论时,显然要花很多时间来安装它们。我们家中所有专业安装的橱柜均使用隐藏式和可调式的欧式铰链(百隆)。

    回复
    • Customer Service
      客户服务

      嗨,杰伊。我建议为此使用钻床。垂直对齐对于铰链正常工作非常重要。
      谢谢
      美国保罗·伍德沃克斯协会

      回复
  6. Mike
    麦克风

    因此,使桶在孔内膨胀的螺丝…扩展设计旨在消除对胶水的需求,使其易于移除吗?还是应该用环氧树脂将它们粘在适当的位置?

    回复
    • Customer Service
      客户服务

      嗨,迈克。你是对的。那就是将它们锁定在适当位置的机制。无需胶水。
      谢谢
      美国保罗·伍德沃克斯协会

      回复
  7. Chris Sipes
    克里斯·西佩斯

    我将所有评论放在第二位,此视频对安装桶形铰链没有帮助。这是我观看的第一批视频之一,希望其余视频对您有所帮助。

    回复